aquarium魚缸說明書(aquariumpump魚缸水泵)

益陽花鳥魚蟲市場2024-11-02 17:00:011.07 W閱讀0評論

溫馨提示：這篇文章已超過641天沒有更新，請注意相關的內容是否還可用！

今天給各位分享aquarium魚缸說明書的知識，其中也會對aquarium pump魚缸水泵進行解釋，如果能碰巧解決你現在面臨的問題，別忘了關注祥龍魚場哦，現在開始吧！

今天給各位分享aquarium魚缸說明書的知識，其中也會對aquarium pump魚缸水泵進行解釋，如果能碰巧解決你現在面臨的問題，別忘了關注祥龍魚場哦，現在開始吧！

本文目錄一覽：

1、哪位英語高手幫幫忙吧，是一個產品說明書的翻譯。。。
2、關于桌面水族箱 Aquarium Desktop
3、aquarium是什么意思
4、aquarium什么意思
5、overll aquarium魚缸加熱棒開關在哪

哪位英語高手幫幫忙吧，是一個產品說明書的翻譯。。。

Aquarium Controller specification

The functional specification:

We use advanced liquid crystal display, more beautiful, top-grade;

Red and green, two-color LED bargraph with temperature changes, has further strengthened dynamic effect;

Logo displayed screen rich, practical.The use of Chinese prompt that allows a user at a glance;

In formulation of Chinese button, more convenient user actions;

Logo displayed temperature measurement range: 0.0 ° c ~ 99.9 ° c;

Temperature measurement accuracy: formulation of ±0.5 ° c;

Logo displayed temperature display resolution: 0.1 ° c;

The scope of Sep. temperature control: 18 ° c ~ 40 ° c;

Supply voltage: formulation of AC220V ± 10%, 50 Hz;

Power consumption: 8W formulation;

Capacity: the relay contact: 5A

Instructions:

1. the parameter settings:

1.1, press the menu key, ” “ access to set the status of the real time clock (continue pressing ” “ menu to go directly to the next parameter setting), the on-screen clock ” and “ clock set signs with Flash, and you're right key to modify the hour, minute by modifying the keys to subtract.

1.2, the second time you press the menu key ” “, lights all the way into the startup and shutdown time set status, screen the first time and all the way light switch timing ” “ lights flicker, signs with adding several key modifications on time, modify the range: 0 ~ 24.Use the shutdown time unreduced keys modified, modify the range: 0 ~ 24.This feature is available only if the automatic lighting ” “ mode is valid.For example: the lights all the way to treat the first time is set to 8, will close time setting is 21, and the light mode is automatic lighting ” “ (light mode conversion please read section 3 of this description), then the 8 o'clock every morning, the lights will automatically open all the way at night Blackjack, the first light is automatically turned off all the way.

1.3, the third time you press the menu key ” “, proceed to the second road lighting startup and shutdown time set the State, the second on the screen the way light switch time and timing ” “ lights flashing signs, modify, and apply the same approach in section 1.2.

1.4, the fourth time you press the menu key, ” “ to enter the set state temperature control points, the water temperature setting on the screen numbers and water temperature setting ” “ signs with Flash, and you're right arrow and numerical keys to subtract, modify the scope of the modified: 18.0 ° c ~ 33.9 ° c temperature upper and lower limits for set value that is set value minus 2 ° c.For example: numerical water temperature setting is 25 ° c, is the actual temperature is below 23 ° c, start them to start, the water temperature of 25 ° c, close them, stop.

1.5, the fifth time you press a key ” “ menu, save all the Setup key to exit the setup status.

2. in the absence of any unlock: key press after 10 seconds, press key automatically locked, corner of the screen button symbol.If you want to unlock, press ” “ +/unlock keys, corner of the screen, not you can manipulate the button.

3. manual on lighting and light conversions: automatically during normal display, and a key press is not locked, press ” “-/automatic keys to select the light control mode, then press Select two twice a lighting control mode, the on-screen ” “ manually lights automatically symbols and “ ” symbols with light touches keystrokes, choose which mode and light which character.

4. manually light control: in the normal display status, lighting control mode is manually ” and “ keystroke to Toko is not locked, ” “ light 1 used key-press ” and “ light 2 buttons manual control section during the whole journey lights and the second road opening and closing of the lights.Light is on, the on-screen symbol bulb ” “ on light flashes.

5. automatic light control: Please read this guide section 1.2.

6. the temperature control: Please read this guide section 1.4.

7. the circulating pump control: in the normal display, and a key press is not locked state, press the key ” “ cycle starts or shuts down the circulating pump, start circulating pump, the screen at the bottom of the impeller rotating “. ” icon

8. an alternate control switches: in the normal display, and a key press is not locked state, press the key ” “ standby to activate or deactivate an alternate control switch, standby switch to start, the screen the following alternate ” “ characters flicker.This standby switch is reserved for use by the user of the retro-Aquarium device other than a standard configuration, such as oxygen, etc.

9. the Aquarium Controller panels and relay control board link cable connectors, if you are using as a result of special needs pull-out, please make a note of good unplug the cable arranged before, when you want to again docking in strict accordance with the arrangement of pull-out is put aside the docking, or may cause damage to the consequences of the controller.